Command Line Interface Guide

292 omconfig storage Commands
omconfig Reactivate PCIe SSD Device
Use the following omconfig command syntax to reactivate the specified PCIe
SSD device that was part of the cache pool.
Complete Syntax
omconfig storage pciessd action=reactivate
subsystem=id pciedevice=<PDISKID>
where id is the subsystem ID and <PDISKID> variable specifies the physical
disk.
To obtain these values, type omreport storage controller to display the
controller IDs and then type omreport storage pdisk controller=ID to
display the IDs for the physical disks attached to the controller.
Example Syntax
To reactivate the specified PCIe SSD device, type:
omconfig storage pciessd action=reactivate
subsystem=2 pciedevice=0:2:0 force=yes
omconfig Fluid Cache Commands
The following sections provide the omconfig command syntax required to
execute fluid cache tasks.
omconfig Applying or Updating License to the Fluid Cache
Use the following omconfig command syntax to apply or upgrade the fluid
cache license.
Table 8-17. omconfig Fluid Cache Commands
Required Command Levels (1, 2, 3) Optional name=value pairs
omconfig storage fluidcache
action=applylicense licensefile=<filename>
action=connect