Command Line Interface Guide

270 omconfig storage Commands
omconfig Set Patrol Read Mode
Use the following omconfig command syntax to set the patrol read mode for
the controller.
Complete Syntax
omconfig storage controller action=
setpatrolreadmode controller=id mode=
manual|auto|disable
where id is the controller ID as reported by the omreport storage controller
command.
Example Syntax
To set the patrol read on controller 1 to manual mode, type:
omconfig storage controller action=
setpatrolreadmode controller=1 mode=manual
omconfig Start Patrol Read
Use the following omconfig command syntax to start the patrol read task on
the controller.
Complete Syntax
omconfig storage controller action=startpatrolread
controller=id
where id is the controller ID as reported by the omreport storage controller
command.
Example Syntax
To start the patrol read task on controller 1, type:
omconfig storage controller action=startpatrolread
controller=1
NOTE: To start patrol read, the current patrol read mode is set to Manual.