Command Line Interface Guide

266 omconfig storage Commands
Complete Syntax
omconfig storage controller action=
setcheckconsistencyrate controller=id rate=<0 to
100>
where id is the controller ID as reported by the omreport storage controller
command.
Example Syntax
To set the check consistency rate to 50 on controller 1, type:
omconfig storage controller action=
setcheckconsistencyrate controller=1 rate=50
omconfig Export the Controller Log
Use the following omconfig command syntax to export the controller log to a
text file. See the Dell OpenManage Online Help for more information about
the exported log file.
Complete Syntax
omconfig storage controller action=exportlog
controller=id
where id is the controller ID as reported by the omreport storage controller
command.
Example Syntax
To export the log on controller 1, type:
omconfig storage controller action=exportlog
controller=1
By default, the log file is exported to C:\WINNT or C:\Windows on Microsoft
Windows systems (based on the Windows version used) and /var/log on all
Linux systems.