Command Line Interface Guide

264 omconfig storage Commands
Complete Syntax
omconfig storage controller action=
changesecuritykey controller=id keyid=<keyid
string> passphrase=<passphrase string>
oldpassphrase=<old passphrase string>[escrow=yes]
[filepath=<Absolute path to the escrow file>]
Example Syntax
To change the encryption key for the controller, type:
omconfig storage controller action=
changesecuritykey controller=1 keyid=Dell_123
passphrase=Dell_123 oldpassphrase=Dell_321 escrow=
yes filepath=C:/escrow.xml
NOTE: If you set escrow=yes, specify the escrow file path.
omconfig Delete Encryption Key
Use the following omconfig command syntax to delete the encryption key for
the controller.
Complete Syntax
omconfig storage controller action=
deletesecuritykey controller=id
where id is the controller ID as reported by the omreport storage controller
command.
Example Syntax
To delete the security key on controller 1, type:
omconfig storage controller action=
deletesecuritykey controller=1
omconfig Set Background Initialization Rate
Use the following omconfig command syntax to set the background
initialization rate.