Command Line Interface Guide

omconfig storage Commands 257
size=<number | max | min> parameter (required)
pdisk=<connector:targetID,connector:targetID,.....> parameter (required)
[stripesize=< 2kb| 4kb| 8kb| 16kb| 32kb| 64kb| 128kb>] parameter
(optional)
[cachepolicy=<d | c>] parameter (optional)
[readpolicy=<ra| nra| ara| rc| nrc>] parameter (optional)
[writepolicy=<wb| wt| wc| nwc | fwb>] parameter (optional)
[name=<string>] parameter (optional)
[spanlength=<n>] parameter (optional)
controller=id Parameter (Required)
Specify the controller ID as reported by the omreport storage controller
command. For example:
controller=2
raid=<c| r0 | r1 | r1c | r5 | r6 | r10 | r50 | r60> Parameter (Required)
Use the raid=<c| r0| r1| r1c| r5| r6 | r10| r50| r60> parameter to specify
concatenation or a RAID level for a virtual disk. Different controllers support
different RAID levels. See the Dell OpenManage Online Help for more
information about RAID levels a controller supports and for general
information about RAID levels and concatenation. Table 8-5 indicates how to
specify the raid=n parameter for each RAID level and concatenation.
Table 8-5. Raid Level and Concatenation
RAID Level or Concatenation raid=n Parameter Specification
RAID-0 raid=r0
RAID-1 raid=r1
RAID-5 raid=r5
RAID-6 raid=r6
RAID-10 raid=r10
RAID-50 raid=r50
RAID-60 raid=r60
RAID-1-concatenated raid=r1c
Concatenation raid=c