Command Line Interface Guide

omconfig storage Commands 243
omconfig Secure Virtual Disk
Use the following omconfig command syntax to encrypt a virtual disk.
Complete Syntax
omconfig storage vdisk action=securevd controller=
id vdisk=id
where id is the controller ID and virtual disk ID as reported by the omreport
command. To obtain these values, type omreport storage controller to display
the controller IDs and then type omreport storage vdisk controller=ID to
display the IDs for the virtual disks attached to the controller.
Example Syntax
To encrypt virtual disk 4 on controller 1, type:
omconfig storage vdisk action=securevd controller=
1 vdisk=4
omconfig Clear Virtual Disk Bad Blocks
Use the following omconfig command syntax to clear virtual disk bad blocks.
Complete Syntax
omconfig storage vdisk action=clearvdbadblocks
controller=id vdisk=id
where id is the controller ID and virtual disk ID as reported by the omreport
command. To obtain the values for controller ID and virtual disk ID, type
omreport storage controller to display the controller IDs and then type
omreport storage vdisk controller=ID to display the IDs for the virtual disks
attached to the controller.
Example Syntax
For example, to clear bad blocks on virtual disk 4 on controller 1, type:
omconfig storage vdisk action=clearvdbadblocks
controller=1 vdisk=4