Command Line Interface Guide

omconfig storage Commands 241
Example Syntax
To delete virtual disk 4 on controller 1, type:
omconfig storage vdisk action=deletevdisk
controller=1 vdisk=4
omconfig Format Virtual Disk
Use the following omconfig command syntax to format a virtual disk.
Complete Syntax
omconfig storage vdisk action=format controller=id
vdisk=id
where id is the controller ID and virtual disk ID as reported by the omreport
command. To obtain these values, type omreport storage controller to display
the controller IDs and then type omreport storage vdisk controller=ID to
display the IDs for the virtual disks attached to the controller.
Example Syntax
To format virtual disk 4 on controller 1, type:
omconfig storage vdisk action=format controller=1
vdisk=4
omconfig Reconfiguring Virtual Disks
You can reconfigure a virtual disk to change the virtual disk’s RAID level or
increase its size by either adding physical disks or using the available free
space. On some controllers, you can also remove physical disks.
Complete Syntax
omconfig storage vdisk action=reconfigure
controller=id vdisk=id raid=<c| r0| r1| r1c| r5|
r6| r10> pdisk=<PDISK> [size=<size>
vdcapacityexpansion=yes sizeinpercent=<1 to 100>]