Command Line Interface Guide

omconfig storage Commands 239
omconfig Cancel Background Initialize
Use the following omconfig command syntax to cancel the background
initialization process on a virtual disk.
Complete Syntax
omconfig storage vdisk action=cancelbginitialize
controller=id vdisk=id
where id is the controller ID and virtual disk ID as reported by the omreport
command. To obtain these values, type omreport storage controller to display
the controller IDs and then type omreport storage vdisk controller=ID to
display the IDs for the virtual disks attached to the controller.
Example Syntax
To cancel background initialization on virtual disk 4 on controller 1, type:
omconfig storage vdisk action=cancelbginitialize
controller=1 vdisk=4
omconfig Assign Dedicated Hot Spare
Use the following omconfig command syntax to assign one or more physical
disks to a virtual disk as a dedicated hot spare.
Complete Syntax
omconfig storage vdisk action=
assigndedicatedhotspare controller=id vdisk=id
pdisk=<PDISKID> assign=yes
where id is the controller ID and virtual disk ID. The <PDISKID> variable
specifies the physical disk.
To obtain the values for the controller, virtual disk, and physical disk, type
omreport storage controller to display the controller IDs and then type
omreport storage vdisk controller=ID and omreport storage pdisk
controller=ID to display the IDs for the virtual disks and physical disks
attached to the controller.