Command Line Interface Guide

234 omconfig storage Commands
Complete Syntax
omconfig storage vdisk action=
cancelcheckconsistency controller=id vdisk=id
where id is the controller ID and virtual disk ID as reported by the omreport
command. To obtain these values, type omreport storage controller to display
the controller IDs and then type omreport storage vdisk controller=ID to
display the IDs for the virtual disks attached to the controller.
Example Syntax
To cancel a check consistency on virtual disk 4 on controller 1, type:
omconfig storage vdisk action=
cancelcheckconsistency controller=1 vdisk=4
omconfig Pause Check Consistency
Use the following omconfig command syntax to pause a check consistency
while it is in progress. See the Dell OpenManage Online Help for more
information about Pause Check Consistency.
Complete Syntax
omconfig storage vdisk action=
pausecheckconsistency controller=id vdisk=id
where id is the controller ID and virtual disk ID as reported by the omreport
command. To obtain these values, type omreport storage controller to display
the controller IDs and then type omreport storage vdisk controller=ID to
display the IDs for the virtual disks attached to the controller.
Example Syntax
To pause a check consistency on virtual disk 4 on controller 1, type:
omconfig storage vdisk action=
pausecheckconsistency controller=1 vdisk=4