Command Line Interface Guide

230 omconfig storage Commands
Complete Syntax
omconfig storage pdisk action=exportlog
controller=id pdisk=<PDISKID>
where id is the controller ID. The <PDISKID> variable specifies the
physical disk.
To obtain these values, type omreport storage controller to display the
controller IDs and then type omreport storage pdisk controller=ID to
display the IDs for the physical disks attached to the controller.
Example Syntax
To export log on physical disk 3 on connector 0 of controller 1:
• For SAS controllers:
omconfig storage pdisk action=exportlog
controller=1 pdisk=0:2:3
omconfig Convert RAID to Non-RAID
Use the following omconfig command to convert RAID to non-RAID on a
physical disk.
Complete Syntax
omconfig storage pdisk action=convertraidtononraid
controller=id pdisk=<PDISKID>
where id is the controller ID. The <PDISKID> variable specifies the
physical disk.
To obtain these values, type omreport storage controller to display the
controller IDs and then type omreport storage pdisk controller=ID to
display the IDs for the physical disks attached to the controller.
NOTE: To convert multiple RAID to non-RAID on a given controller, use omconfig
storage controller action=convertraidtononraid command. For more information,
see "omconfig Convert Multiple RAID to Non-RAID" on page 273.