Command Line Interface Guide

228 omconfig storage Commands
Complete Syntax
omconfig storage pdisk action=cancelclear
controller=id pdisk=<PDISKID>
where id is the controller ID. The <PDISKID> variable specifies the
physical disk.
To obtain these values, type omreport storage controller to display the
controller IDs and then type omreport storage pdisk controller=ID to
display the IDs for the physical disks attached to the controller.
Example Syntax
In this example, you want to cancel the clear of physical disk 3 on connector 0
of controller 1. On a SAS controller, the physical disk resides in enclosure 2.
To cancel the clear of the physical disk described in this example:
• For SCSI, SATA, and ATA controllers:
omconfig storage pdisk action=cancelclear
controller=1 pdisk=0:2:3
omconfig Enable Device Write Cache
Use the following omconfig command to enable write cache on a physical
disk for the PCIe SSD controller.
Complete Syntax
omconfig storage pdisk action=
enabledevicewritecache controller=id pdisk=
<PDISKID>
where id is the controller ID. The <PDISKID> variable specifies the
physical disk.
To obtain these values, type omreport storage controller to display the
controller IDs and then type omreport storage pdisk controller=ID to
display the IDs for the physical disks attached to the controller.