Command Line Interface Guide

224 omconfig storage Commands
To obtain these values, type omreport storage controller to display the
controller IDs and then type omreport storage pdisk controller=ID to display
the IDs for the physical disks attached to the controller.
Example Syntax
To bring physical disk 3 on connector 0 of controller 1 back online:
• For SCSI, SATA, and ATA controllers:
omconfig storage pdisk action=online controller=1
pdisk=0:3
• For SAS controllers:
omconfig storage pdisk action=online controller=1
pdisk=0:2:3
NOTE: On a SAS controller, the physical disk resides in enclosure 2.
omconfig Assign Global Hot Spare
Use the following omconfig command syntax to assign a physical disk as a
global hot spare.
Complete Syntax
omconfig storage pdisk action=assignglobalhotspare
controller=id pdisk=<PDISKID> assign=yes
where id is the controller ID. The <PDISKID> variable specifies the
physical disk.
To obtain these values, type omreport storage controller to display the
controller IDs and then type omreport storage pdisk controller=ID to
display the IDs for the physical disks attached to the controller.
Example Syntax
To assign the physical disk 3 on connector 0 of controller 1 as a global hot
spare:
• For SCSI, SATA, and ATA controllers:
omconfig storage pdisk action=assignglobalhotspare
controller=1 pdisk=0:3 assign=yes