Command Line Interface Guide

omconfig storage Commands 223
omconfig Offline Physical Disk
Use the following omconfig command syntax to make a physical disk offline:
Complete Syntax
omconfig storage pdisk action=offline controller=
id pdisk=<PDISKID>
where id is the controller ID. The <PDISKID> variable specifies the
physical disk.
To obtain these values, type omreport storage controller to display the
controller IDs and then type omreport storage pdisk controller=ID to
display the IDs for the physical disks attached to the controller.
Example Syntax
To make physical disk 3 on connector 0 of controller 1 offline:
• For SCSI, SATA, and ATA controllers:
omconfig storage pdisk action=offline controller=1
pdisk=0:3
• For SAS controllers:
omconfig storage pdisk action=offline controller=1
pdisk=0:2:3
NOTE: On a SAS controller, the physical disk resides in enclosure 2.
omconfig Online Physical Disk
Use the following omconfig command syntax to bring an offline physical disk
back online.
Complete Syntax
omconfig storage pdisk action=online controller=id
pdisk=<PDISKID>
where id is the controller ID. The <PDISKID> variable specifies the
physical disk.