Command Line Interface Guide

218 omconfig storage Commands
omconfig Physical Disk Commands
The following sections provide the omconfig command syntax required to
execute physical disk tasks.
connector Displays a list of the omconfig storage
connector parameters for configuring
connectors.
cachecade Displays a list of the omconfig storage
cachecade parameters for configuring
cachecades.
pciessed Displays PCIe SSD configuration commands.
fluidcache Displays the fluid cache properties and the
associated fluid cache disks.
fluidcachepool Displays the fluid cache pool properties.
partition Displays the partition details of the specified
controller and virtual disk.
fluidcachedisk Displays the fluid cache disk properties.
Table 8-2. omconfig Physical Disk Commands
Required Command Levels
(1, 2, 3)
Optional name=value pairs
omconfig storage pdisk
action=blink controller=id pdisk=<PDISKID>
action=unblink controller=id pdisk=<PDISKID>
action=remove controller=id pdisk=<PDISKID>
action=instantsecureerase controller=id pdisk=
<PDISKID>
action=initialize controller=id pdisk=<PDISKID>
action=offline controller=id pdisk=<PDISKID>
action=online controller=id pdisk=<PDISKID>
action=assignglobalhotspare controller=id pdisk=
<PDISKID> assign=<yes|no>
action=rebuild controller=id pdisk=<PDISKID>
action=cancelrebuild controller=id pdisk=<PDISKID>
Table 8-1. Syntax of omconfig storage help
(continued)
Command
Level 1
Command
Level 2
Command Level 3 Use