Command Line Interface Guide

216 omreport storage Commands
omreport Partition Status
Table 7-14 describes the syntax for the omreport partition commands.
omreport Fluid Cache Disk Status
Table 7-14 describes the syntax for the omreport fluidcachedisk command.
Table 7-18. omreport Partition Commands
Required Command
Levels (1, 2, 3)
Optional name=value pairs Use
omreport storage
partition
Displays the partition details
of the specified virtual disk.
controller=id vdisk=id
where id is the controller
number and the virtual disk
number. For example:
controller=0 vdisk=1.
Displays all the partitions in
the specified virtual disk on
the controller.
Table 7-19. omreport Fluid Cache Disk Command
Required Command Levels (1, 2, 3) Use
omreport storage fluidcachedisk Displays the properties of the fluid cache disks.