Command Line Interface Guide

Introduction 21
corresponding CLI syntax, see the Dell Update Packages for Operating Systems User’s
Guide
or the Dell OpenManage Server Update Utility User’s Guide at
dell.com/support/manuals.
Additional useful topic about the CLI include:
• "Working With CLI Command Results" on page 295
CLI Error Checking and Error Messages
When you type CLI commands, the CLI checks these commands for correct
syntax. If you type a command and the command is executed successfully,
a message is displayed, stating that the command is successful.
Success Messages
When you run a successful omconfig command, data for that component is
displayed.
The following table provides examples of valid omconfig commands and their
success messages.
NOTE: Due to limitations, some commands do not alter the system settings even
though the commands are executed successfully. This is an expected behavior.
Table 1-2. Commands and Messages
Command Message
omconfig chassis temps
index=0 warnthresh=
default
Temperature probe warning
threshold value(s) set
successfully.
omconfig chassis biossetup
attribute=numlock
setting=on
BIOS setup configured
successfully. Change will
take effect after the next
reboot.
omconfig system assetinfo
info=depreciation
duration=6
Asset information set
successfully.