Command Line Interface Guide

omreport storage Commands 209
omreport Power Supply Status
Table 7-8 describes the syntax for the omreport power supply commands.
Table 7-8. omreport Power Supply Commands
Required Command Levels (1,
2, 3) and name=value pair
Optional name=value pairs Use
omreport storage
enclosure
Displays property
information for all enclosures
attached to the system.
controller=id enclosure=
<ENCLOSUREID>
info=pwrsupplies
where id is the controller
number and
ENCLOSUREID is the
enclosure number.
For example: controller=0
enclosure=2
Displays the information
about the power supplies for
the specific enclosure.
controller=id enclosure=
<ENCLOSUREID>
info=pwrsupplies index=n
where id is the controller
number and
ENCLOSUREID is the
enclosure number and “n” is
the number of a power supply.
For example: controller=0
enclosure=2 info=
pwrsupplies index=1
Displays the specified power
supply.