Command Line Interface Guide

206 omreport storage Commands
omreport Enclosure Status
Table 7-5 describes the syntax for the omreport enclosure commands.
Table 7-5. omreport Enclosure Commands
Required
Command Levels
(1, 2, 3)
Optional name=value pairs Use
omreport
storage
enclosure
Displays property
information for all
enclosures attached to
the system.
controller=id
where id is the controller number
Displays all enclosures
connected to the
controller.
controller=id enclosure=
<ENCLOSUREID>
where id is the controller number and
<ENCLOSUREID> is the enclosure ID.
Example for SCSI controllers: controller=0
enclosure=2. Example for SAS controllers:
controller=0 enclosure=1:2.
Displays the specified
enclosure and its
components.