Command Line Interface Guide

omreport storage Commands 201
7
omreport storage Commands
The omreport command allows you to view storage component information
for disks, controllers, enclosures, batteries, global storage properties,
connectors, cachecades, fluid cache, and partitions that are part of the storage
system. This chapter explains how to get reports with the level of detail that
you want.
Commands documented in this chapter vary in whether they define the fields
that appear in the results of a particular omreport command. Fields are
defined only if they have a special or less familiar use.
The following sections provide the omreport command syntax required to
display the information of various storage components.
To see a list of valid commands for omreport storage, type:
omreport storage -?
Table 7-1 provides the omreport storage command syntax.
Table 7-1. Syntax for omreport storage help
Command
Level 1
Command
Level 2
Command Level 3 Use
omreport
storage Displays a list of storage components for
which omreport commands are available.
pdisk Displays a list of the omreport storage
pdisk parameters for displaying physical
disk information.
vdisk Displays a list of omreport storage vdisk
parameters for displaying virtual disk
information.
controller Displays a list of the omreport storage
controller parameters for displaying
controller information.
enclosure Displays a list of the omreport storage
enclosure parameters for displaying
enclosure information.