Command Line Interface Guide

200 Using the Storage Management Service
User Privileges for omreport storage and
omconfig storage
Storage Management requires Administrator privileges to use the omconfig
storage command. User and Power User privileges are sufficient to use the
omreport storage command.
battery=id Indicates the battery ID as reported by the omreport
command. To obtain this value, type omreport storage
controller to display the controller IDs and then type
omreport storage battery controller=id to
display the ID for the controller battery.
< > The caret symbols (< >) enclose variable elements that you
must specify.
For example, the name=<string> parameter is specified as
name=VirtualDisk1.
[ ] The bracket symbols ([ ]) indicate optional elements that you
can choose whether or not to specify.
For example, when creating a virtual disk, the [name=
<string>] parameter indicates that you have the option of
specifying the virtual disk name. If you omit this parameter
from the syntax, then a default name for the virtual disk is
chosen for you.
| The pipe symbol (|) separates two or more options from which
one only is selected.
For example, when creating a virtual disk, the cachepolicy=d|c
indicates that the cache policy is specified as either
cachepolicy=d or cachepolicy=c.
Table 6-2. Syntax For of Parameters
(continued)
Syntax Description