Command Line Interface Guide

192 omconfig system or servermodule assetinfo: Editing Cost of Ownership Values
The following message is displayed:
Asset information set successfully.
You can type more than one omconfig system assetinfo or omconfig
servermodule assetinfo command at the same time, as long as all the
parameters for name=value pair 2 belong to name=value pair 1. For an
example, see "Example Commands for Adding Acquisition Information" on
page 179.
Adding System Information
System information includes the primary user of the system, the phone
number for the primary user, and the location of the system. Table 5-11 lists
the valid parameters for adding system information.
Table 5-11. Parameters of omconfig system assetinfo info=system or omconfig
servermodule assetinfo info=system
Command
Level 1
Command
Level 2
Command
Level 3
Name=
Value Pair 1
Name= Value Pair 2 Description
omconfig
system or
servermodule
assetinfo
info=
system
location=<text> Location of the
system.
primaryphone=
<n>
Phone number of
the primary user
of the system.
primaryuser=
<user>
Primary user of
the system.