Command Line Interface Guide

omconfig: Managing Components Using the Instrumentation Service 167
event=powerfail Sets action or enables or disables alert generation
when a power device probe detects that the power
supply, voltage regulator module, or DC to DC
converter has failed.
event=processorwarn Sets action or enables or disables alert generation
when a processor probe detects that the processor is
running at less than peak performance or speed.
event=processorfail Sets action or enables or disables alert generation
when a processor probe detects that the processor has
failed.
event=processorabsent Sets action or enables or disables alert generation
when a processor probe detects that the processor is
absent.
event=redundegrad Sets action or enables or disables alert generation
when the system fans and/or power supplies become
inoperative, resulting in less than full redundancy for
that component.
event=redunlost Sets action or enables or disables alert generation
when the system fans and/or power supplies become
inoperative, resulting in a lost or a no redundant
components working condition for that component.
event=systempowerwarn Sets actions when a power consumption probe detects
a warning value.
event=systempowerfail Sets actions when a power consumption probe detects
a failure value.
event=tempwarn Sets action or enables or disables alert generation
when a temperature probe detects that the
temperature is approaching the maximum or
minimum limits.
event=
removableflashmediapresent
Sets actions that Server Administrator performs when
the system detects a removable flash media.
event=
removableflashmediawarn
Sets actions that Server Administrator performs when
a removable flash media warning is displayed.
Table 4-26. Parameters of omconfig system platformevents
(continued)
Event Name Description