Command Line Interface Guide

162 omconfig: Managing Components Using the Instrumentation Service

Example Set Alert Action Commands

The following examples are valid example commands. For each successful

command issued, the following message is displayed:

Alert action(s) configured successfully.

• For Current Probe Actions

To disable system console alert if a current probe detects a warning event,

type:

omconfig system alertaction event=currentwarn

alert=false

omconfig servermodule alertaction event=

currentwarn alert=false

To enable broadcast messages if a current probe detects a failure event, type:

omconfig system alertaction event=currentfail

broadcast=true

omconfig servermodule alertaction event=

currentfail broadcast=true

• For Fan Probe Actions

To generate alerts when a fan probe detects a failure value, type:

omconfig system alertaction event=fanfail alert=

true

omconfig servermodule alertaction event=fanfail

alert=true

event=storagectrlbatteryfail Sets actions when a storage controller battery detects a

failure value.

NOTE: This event is not available on Blade systems.

Table 4-23. Events for Which You Can Set Alert Actions

(continued)

Event Name Description