Command Line Interface Guide

omconfig: Managing Components Using the Instrumentation Service 145
privilegelevel=
administrator | operator |
user
administrator: Sets the maximum
privilege level that is accepted on a serial
over LAN channel, to Administrator.
operator: Sets the maximum privilege
level that is accepted on a serial over
LAN channel, to Operator.
user: Sets the maximum privilege level
that is accepted on a serial over LAN
channel, to User.
config=
settodefault
Takes the default configuration settings.
config=
terminalmode
deletecontrol=outputdel |
outputbkspspbksp
outputdel: BMC outputs a <Delete>
character when <Backspace> or
<Delete> is received.
outputbkspspbksp: BMC outputs a
<Backspace><Space><Backspace>
character when <Backspace> or
<Delete> is received.
handshakingcontrol=
enabled | disabled
enabled: Directs the BMC to output a
character sequence that indicates when
its input buffer is ready to accept
another command.
disabled: Does not direct the BMC to
output a character sequence that
indicates when its input buffer is ready
to accept another command.
inputlinesequence=cr |
null
cr: The console uses <CR> as a new
line sequence.
null: The console uses <NULL> as a
new line sequence.
lineediting=enabled |
disabled
enabled: Enables line editing as a line
is typed.
disabled: Disables line editing as a line is
typed.
Table 4-12. Parameters of omconfig chassis remoteaccess or omconfig mainsystem
remoteaccess
(continued)
name=value pair 1
config=
name=value pair 2 Description