Command Line Interface Guide

140 omconfig: Managing Components Using the Instrumentation Service
ipsource=static | dhcp |
systemsoftware
static: Static if the IP address of the
BMC LAN interface is a fixed, assigned
IP address.
dhcp: DHCP if the source of the
IP address of the BMC LAN interface is
the dynamic host configuration protocol.
systemsoftware: System software if the
source of the IP address of the BMC
LAN interface is from the system
software.
NOTE: All commands are not supported
on the system.
ipaddressv6=<IPv6
address> prefixlength=
length
Validates the IPv6 address for
configuration.
gatewayv6=<value> Validates the IPv6 gateway.
ipsourcev6=static | auto static: IPv6 address source is set to static.
auto: IPv6 address source is set to auto.
altdnsserverv6 Validates the address of the alternate
DNS server for configuration.
dnssourcev6=static | auto static: DNS source is set to static.
auto: DNS source is set to auto.
vlanenable=true | false true: Enables the virtual
LAN identification.
false: Disables the virtual
LAN identification.
vlanid=number number: Virtual LAN identification in
the range of 1 to 4094.
vlanpriority=number number: Priority of virtual LAN
identification in the range of 0 to 7.
Table 4-12. Parameters of omconfig chassis remoteaccess or omconfig mainsystem
remoteaccess
(continued)
name=value pair 1
config=
name=value pair 2 Description