Command Line Interface Guide

omconfig: Managing Components Using the Instrumentation Service 135
NOTE: This command is applicable to selected Dell yx 0 x systems that support
PMBus only.
NOTE: Power monitoring requires license to configure the power budget
information. If the appropriate license is not installed or has expired, the system
displays an error message. For more information, see
The Dell Licensing
Management Guide at dell.com/support/manuals.
Default Warning Thresholds
NOTE: Sensor managing capabilities vary across systems.
To set both the upper and lower power consumption probe warning threshold
values to the recommended default value, type:
omconfig chassis pwrmonitoring config=probe index=
0 warnthresh=settodefault
or
omconfig mainsystem pwrmonitoring config=probe
index=0 warnthresh=settodefault
NOTE: You cannot default one value and set another. If you default the minimum
warning threshold value, you are also selecting the default value for the maximum
warning threshold value.
config=resetreading type=energy |
peakpower
energy: Resets the system energy reading.
peakpower: Resets the system peak
power.
Table 4-11. Parameters of omconfig chassis pwrmonitoring or omconfig mainsystem
pwrmonitoring
(continued)
name=value pair 1 name=value pair 2 Description