Command Line Interface Guide

134 omconfig: Managing Components Using the Instrumentation Service
NOTE: Reboot the system for the power profiles setup options to take effect.
omconfig chassis pwrmonitoring or omconfig mainsystem
pwrmonitoring
Use the omconfig chassis pwrmonitoring or omconfig mainsystem
pwrmonitoring command to configure power consumption information.
Table 4-11 lists the valid parameters for the command.
memorypowermode=
min | 800 | 1067 |
1333 | max
min: Sets the mode to minimum
power utilization.
800 | 1067 | 1333: Set the mode to
800, 1067, or 1333 MHz.
max: Sets the mode to maximum
performance.
NOTE: These options are applicable
only when a custom profile is selected.
fanmode=min | max min: Sets the mode to minimum
power utilization.
max: Sets the mode to maximum
performance.
NOTE: These options are applicable
only when a custom profile is selected.
Table 4-11. Parameters of omconfig chassis pwrmonitoring or omconfig mainsystem
pwrmonitoring
name=value pair 1 name=value pair 2 Description
index=<n> NA Number of the probe or probe index
(must specify).
config=probe warnthresh=
settodefault
Sets the minimum and maximum
warning thresholds values to default.
warnthresh=<n> Sets a value for the warning threshold.
unit=watt | btuphr watt: Displays the unit in Watts.
btuphr: Displays the unit in BTU/hr.
Table 4-10. Parameters of omconfig chassis pwrmanagement or omconfig mainsystem
pwrmanagement
(continued)
name=value pair 1 name=value pair 2 Description