Command Line Interface Guide

132 omconfig: Managing Components Using the Instrumentation Service
omconfig chassis pwrmanagement or omconfig mainsystem
pwrmanagement
Use the omconfig chassis pwrmanagement or omconfig mainsystem
pwrmanagement command to configure power cap and manage profiles that
control power utilization.
NOTE: This command is valid only on systems prior to PowerEdge yx2x systems.
Table 4-10 lists the valid parameters for the command.
Table 4-10. Parameters of omconfig chassis pwrmanagement or omconfig mainsystem
pwrmanagement
name=value pair 1 name=value pair 2 Description
config=budget cap=<value> Sets the threshold value for power
budget.
NOTE: From PowerEdge yx2x system
onwards, power budget requires
license to configure power cap. If the
appropriate license is not installed or
has expired, the system displays an
error message. For more information,
see
The Dell Licensing Management
Guide on dell.com/support/manuals.
setting=enable |
disable
enable: Enables powercap settings.
disable: Disables powercap settings.
unit=watt | btuphr |
percent
watt: Configure the unit in Watts.
btuphr: Configure the unit in
BTU/hr.
percent: Configure the unit in
percentage.