Command Line Interface Guide

124 omconfig: Managing Components Using the Instrumentation Service
omconfig chassis currents or omconfig mainsystem currents
NOTE: This command is no longer available through Server Administrator.
omconfig chassis fans or omconfig mainsystem fans
Use the omconfig chassis fans or omconfig mainsystem fans command to
set fan probe warning thresholds. As with other components, you can view
both warning and failure threshold values, but you cannot set failure
thresholds. The system manufacturer sets the minimum and maximum
failure thresholds.
Valid Parameters for Fan Warning Thresholds
Table 4-5 lists the valid parameters for setting fan warning thresholds:
UEFI Boot Settings attribute=UefiBootSeq sequence=aliasname1,
aliasname2,..... aliasnameN
Table 4-5. Parameters of omconfig chassis fans or omconfig chassis fans
name=value pair Description
index=<n> Number of the probe or probe index (must specify).
warnthresh=default Sets the minimum and maximum warning thresholds to
default.
minwarnthresh=<n> Minimum warning threshold.
maxwarnthresh=<n> Maximum warning threshold.
Table 4-4. BIOS Setup Settings on PowerEdge yx2x Systems
(continued)
Group name=value pair 1
attribute=
name=value pair 2
setting=