Command Line Interface Guide

122 omconfig: Managing Components Using the Instrumentation Service
System
Information
attribute=
SysMfrContactInfo
setting=<string>
attribute=
SystemBiosVersion
setting=<string>
attribute=
SystemManufacturer
setting=<string>
attribute=
SystemModelName
setting=<string>
attribute=
SystemServiceTag
setting=<string>
System Profile
Settings
attribute=MemFrequency setting=MaxPerf | 1600MHz |
1333MHz |1067MHz | 800MHz |
MaxReliability
attribute=MemPatrolScrub setting=Standard | Extended |
Disabled
attribute=
MemRefreshRate
setting=1x | 2x
attribute=MemVolt setting=AutoVolt | Volt15V |
Volt135V
NOTE: Volt15V represents 1.5 Volt
and Volt135V represents 1.35 Volt
attribute=ProcC1E setting=Enabled | Disabled
attribute=ProcCStates setting=Enabled | Disabled
attribute=ProcPwrPerf setting=MaxPerf | MinPwr |
SysDbpm | OsDbpm |
attribute=ProcTurboMode setting=Enabled | Disabled
attribute=SysProfile setting=PerfPerWattOptimizedOs
| PerfPerWattOptimizedDapc |
PerfOptimized | Custom |
DenseCfgOptimized
System Security attribute=AcPwrRcvry setting=On | Off | Last
Table 4-4. BIOS Setup Settings on PowerEdge yx2x Systems
(continued)
Group name=value pair 1
attribute=
name=value pair 2
setting=