Command Line Interface Guide

omconfig: Managing Components Using the Instrumentation Service 121
SATA Settings
(continued)
attribute=SataPortHModel setting=<string>
Serial
Communication
attribute=ConTermType setting=Vt100Vt220 | Ansi
attribute=
ExtSerialConnector
setting=Serial1 | Serial2 |
RemoteAccDevice
attribute=FailSafeBaud setting=115200 | 57600 | 19200 |
9600
attribute=RedirAfterBoot setting=Enabled | Disabled
attribute=SerialComm setting=OnNoConRedir |
OnConRedirCom1 |
OnConRedirCom2 | Off
attribute=
SerialPortAddress
setting=
Serial1Com1Serial2Com2 |
Serial1Com2Serial2Com1 | Com1
| Com2
Slot Disablement attribute=Slot1 setting=Enabled | Disabled |
BootDriverDisabled
attribute=Slot2 setting=Enabled | Disabled |
BootDriverDisabled
attribute=Slot3 setting=Enabled | Disabled |
BootDriverDisabled
attribute=Slot4 setting=Enabled | Disabled |
BootDriverDisabled
attribute=Slot5 setting=Enabled | Disabled |
BootDriverDisabled
attribute=Slot6 setting=Enabled | Disabled |
BootDriverDisabled
attribute=Slot7 setting=Enabled | Disabled |
BootDriverDisabled
Table 4-4. BIOS Setup Settings on PowerEdge yx2x Systems
(continued)
Group name=value pair 1
attribute=
name=value pair 2
setting=