Command Line Interface Guide

112 omconfig: Managing Components Using the Instrumentation Service
attribute=sataport
(0...7) or (a...h)
setting=off | auto off: Disables the SATA port.
auto: Automatically enable the
SATA port.
attribute=
secondaryscsi
setting=on | off on: Enables secondary SCSI.
off: Disables secondary SCSI.
attribute=
serialportaddr
setting=default |
alternate | com1 |
com2
default: Maps serial device 1 to COM
port 1 and serial device 2 to COM
port 2.
alternate: Maps serial device1 to COM
port 2 and serial device 2 to COM
port 1.
com1: Sets serial port address to COM1.
com2: Sets serial port address to COM2.
attribute=
serialcom
setting=off | on
|com1 |com2 |
onwithconsole
off: Disables serial communication
setting.
on: Enables serial communication
setting without console redirection.
com1: Enables serial communication
setting with console redirection through
COM1.
com2: Enables serial communication
setting with console redirection through
COM2.
onwithconsole: Enables serial
communication with console redirection
through COM1 and COM2.
Table 4-3. BIOS Setup Settings on Systems Prior to PowerEdge
yx2x Systems
(continued)
name=value pair 1
attribute=
name=value pair 2
setting=
Description