Command Line Interface Guide

omconfig: Managing Components Using the Instrumentation Service 107
attribute=htassist setting=enabled |
disabled
enabled: Enables the probe filter chipset
option.
disabled: Disables the probe filter
chipset option.
NOTE: Certain applications do not
function fully if you enable or disable this
option.
attribute=ide setting=on | off
force=true
on: Enables IDE.
off: Disables IDE.
force=true: Verification of setting
change.
attribute=
idepridrv
setting=off | auto off: Disables the device.
auto: Detects and enables the device
automatically.
attribute=
intrusion
setting=enabled |
disabled
enabled: Enables the intrusion check
during system boot. If the system also
has bezel intrusion checking, then the
intrusion option checks for removal of
the bezel of the system.
disabled: Disables the intrusion check
during system boot.
attribute=
intusb[1..2]
NOTE: The
following option is
deprecated:
attribute=intusb
setting=enabled |
disabled
enabled: Enables the internal USB port.
disabled: Disables the internal USB
port.
attribute=mouse setting=on | off on: Enables the mouse.
off: Disables the mouse.
Table 4-3. BIOS Setup Settings on Systems Prior to PowerEdge
yx2x Systems
(continued)
name=value pair 1
attribute=
name=value pair 2
setting=
Description