Command Line Interface Guide

100 omconfig: Managing Components Using the Instrumentation Service
omconfig chassis or omconfig mainsystem
Use the omconfig chassis or omconfig mainsystem command to:
• Set to default or assign specific values for fan, voltage, and temperature
probes
• Configure BIOS behavior during system start up
• Clear memory error counts
• Enable or disable power button control features if system configuration
permits
Use the omconfig chassis -? or omconfig mainsystem -? command to view a
list of all omconfig chassis or omconfig mainsystem commands.
omconfig chassis biossetup or omconfig mainsystem biossetup
Use the omconfig chassis biossetup or omconfig mainsystem biossetup
command to configure system BIOS settings that are normally available only
in the BIOS setup boot time settings of the system.
CAUTION: Changing certain BIOS setup options may disable the system or
require you to reinstall the operating system.
NOTE: Reboot the system for the BIOS setup options to take effect.
NOTE: Not all BIOS setup options are available on every system.
NOTE: Due to the limitations of certain operating systems (for example, VMware
ESXi), certain features are not available with this release of OpenManage Server
Administrator.
NOTE: When CSIOR (Collect System Inventory on Restart) is disabled, you cannot
configure the BIOS settings using omconfig command.