Users Guide

36 |
Notification widget
OMPE consists of several operations that are either system generated or
initiated by the user. The Notification widget displays the status summary and
progress of all OMPE operations. The status of the following OMPE operations
are displayed as separate progress bars:
• Discovery
• Health Poll
• EWS Poll
• Status Poll (SNMP)
• Internet Connection
For an ongoing operation, the progress bar displays the estimated time required
to complete the operation.
NOTE: You can also view the Notification widget from the notification
icon( ) in the title bar.
In the Notification widget you can start or stop an operation from the progress
bar with the help of and buttons respectively.
NOTE: You can not stop an ongoing Internet communication operation.
In the Notification widget, unread status summaries are displayed in bold and
the number of unread status summaries are displayed above the icon in the
title bar.
In the Notification widget, you can filter the list of status summaries displayed
based on the operation type and severity of operation.
• Filters based on operation type - Discovery, EWS, Firmware, License, Map,
Print metering, Policy, Templates, and Warranty.
• Filters based on severity of operation status - Critical state ( ), Warning
state( ), Normal state ( ).
NOTE: The number of events with the severity status is displayed next to
the severity icon.
Filtering the notification list
1. To filter the status summary list based on the type of operation, from the
operation type drop-down list, select the type of operation.
The status summary of events of the selected type of operation is
displayed.
2. To further filter the list based on the severity, click on the required severity
status icon.