Users Guide

34 |
You can customize the dashboard to:
• Change the position of the charts using drag-and-drop operation.
• Select a chart to be hidden or displayed.
• Select refresh interval for a chart.
To customize the dashboard view, click . For more information, see
Customizing dashboard view.
Status bar
The status bar shows the total number of printers in the network and the
percentage of printers in each of the following states:
• OK - Displayed in green indicates that the printers are in good health and in
normal condition.
• Warning - Displayed in orange indicates that at least one consumable is
below the threshold or the printer operation panel displays a warning.
• Critical - Displayed in red indicates that the printers are in one of the
following states: Unable to print, Printer offline or Printer is out of service.
Dashboard charts
OMPE provides five predefined charts:
• Device Status
• Toner Levels
• Policy Conformance
• Drum Levels
• Fuser/Roller Levels
Selection of charts
1. From the Dashboard view, click .
A pop-up menu is displayed.
2. Select the check box corresponding to the chart to be displayed.
3. To hide a chart, in the pop-up menu clear the check box for the
corresponding chart.
4. Click Save .
Viewing charts
You can view dashboard charts for a group of printers in pie or column type.
When you hover the mouse pointer on a section of the chart, a pop-up displays
the value of the section.