Users Guide

Discovery | 31
8. For Subnet Mask mode, in the Discovery Mode Input(s) field, enter the IP
address and Subnet Mask .
9. For CSV Import mode, in Discovery Mode Input(s) , click Upload and
select the .csv file to import .
NOTE: You can create a CSV file for a set of printers by specifying the list of
IP addresses in a comma separated list in ANSI text format and save it as.txt
file.
NOTE: A CSV file with the list of IP addresses cannot have any wildcard
characters.
10. Select the system resource usage for printer discovery (ranging from one
to four) by adjusting the slider in the Threshold option.
NOTE: Selecting smaller threshold values results in lesser usage of system
resource. Hence, slowing the speed of discovery.
11. Click Apply .
Scheduling a d iscovery
In the Discovery widget, Run Now option is selected by default for immediate
discovery. You can schedule a discovery profile to be performed once by
selecting the Later option.
1. In the Discovery widget, select Later .
2. From the Schedule Task list, select the schedule frequency.
3. From the Schedule to Run and Time drop-down lists, select schedule date
and time.
4. To add any notes, enter the notes in the Schedule Notes field.
5. Enter a name for the schedule in the Profile/Schedule Name field.
NOTE: This field is mandatory.
6. Click Apply .
Saving a d iscovery profile
You can save the current discovery settings in a discovery profile for later use.
1. In the Discovery widget, select Save in discovery profile check box.
2. Enter a name for the discovery profile in the Profile/Schedule Name field.
3. Click Apply .