User's Manual

Temperature Monitoring 91
NOTE: The table above lists the interval when the sampling interval is at the default
value (1 minute). The sampling interval change will result in the interval change of
15Min and 1H time window. If you change the sampling interval to 3 minutes, the
interval of 15Min time window is 3 minutes. If you change the sampling interval to 6
minutes, the interval of 15Min time window is 3 minutes, and the interval of 1H time
window is 6 minutes. For more information on how to configure the sampling
interval, see "Monitoring Sampling Interval" in the "Configuring Power Center"
chapter.
• View temperature details of a different time window
Click the arrow buttons <> to see the details of previous/next sampling
time, or click the arrow buttons
<<>> to see the details of previous/next
page of results for the current time window.
You can click Average, Maximum, and Minimum to display the selected
value.
• Average: The average value from the previous time point to the current
time point.
•
Maximum: The maximum value from the previous time point to the
current time point.
•
Minimum: The minimum value from the previous time point to the
current time point.
For example, when you view temperature details in the 1H (1 hour) window, the
maximum value at 15:00 shows 40°C and the time interval is 6 minutes, this
value represents that the maximum temperature from 14:54 to 15:00 is 40°C.
Chassis Details:
The Chassis Details table appears when you access the Temperature Details
page on a chassis. Chassis Details lists all blade servers within the chassis and
their temperature details in a table, including:
• Device: Device name.
1M 1 month 1 day
3M 3 months 1 week
1Y 1 year 2 weeks
Table 11-1. Time Window and Time Interval
Time Window Description Time Interval
OpenManagePowerCenter_User_Guide.book Page 91 Friday, March 2, 2012 10:33 AM