Users Guide

4. Make the required changes.

NOTE: You cannot change the selected device or group while editing a policy.

5. In the Summary screen, review the changes and click Finish to save the changes, click Back to return

to the previous screen, or click Cancel to discard the changes.

Deleting a power policy

1. In the left pane, click Policies.

The Policies screen is displayed.

2. In the list of policies, select the check box next to the policy that you want to delete.

NOTE: You can select more than one policy to at a time.

3. In the task menu, click Delete.

The following message is displayed.

Are you sure you want to delete the selected item(s)?

4. Click Yes.

Filtering power policies

You can filter power policies so they display according to type, power cap, and/or status.

1. In the left pane, click Policies.

The Policies screen is displayed.

2. In the task menu, click Filter.

The Policy Filter window is displayed.

NOTE: The Policy Filter wizard is displayed only if you have at least one policy.

3. Select an existing filter from the Select Filter drop-down list and run it or proceed to step 4.

4. Under Quick View, select the Policy Type check box and then select the Static or Dynamic option.

5. Select one or more of the following options:

• Select the Power Cap check box and then enter values in the Minimum and/or Maximum text

boxes.

• Select the Policy Enabled check box and then select the Yes or No option.

• Select the Policy Activated check box and select the Yes or No option.

NOTE: Policy filters stay in effect until they are cleared or until you close the session.

6. Click Run Once to view a filtered list of policies.

• Enter a name for the filter in the Filter Name (Optional) text box and click Save and Run to save

the filter and sort the policies based on the filter criteria.

• Click Cancel to discard the selections and return to the Policies screen.

You can use the saved filters later.