Users Guide

You can select multiple power capabilities.

• Select the Protocol check box and select the protocols used for communication. The available

options are:

– IPMI (Server)

– WS-MAN (Chassis)

– SNMPv1v2c (UPS/PDU)

– SNMPv3 (UPS/PDU)

– HTTPS

– SSH

You can select multiple protocols.

• Select the Status check box and select device status from the drop-down list. The available

options are:

– Connected

– Lost Connection

– Unknown

You can select multiple status.

• Select the Device Model check box and enter the model of the device. The device model is the

specific model information of a device type, for example, Dell PowerEdge M610. If you select

both Device Type and Device Model, make sure that the device type and the device model

match. Else, the results are not displayed.

• Select the Estimated Max Power (W) check box and enter the maximum power for device. The

estimated max power is considered as the peak power consumption by a device.

4. Enter a name for the filter in the Filter Name (Optional) text box, and click Save and Run to save the

filter and sort the devices based on the filter criteria.

• Click Run Once to view a filtered list of devices.

• Click Cancel to return to the All Devices tab.

You can use the saved filters later.

Editing a device

You can edit devices or device groups from the Devices screen.

1. In the left pane, click Devices.

2. Select the check box next to the device or device group that you want to edit.

3. Click Edit.

The Edit Entity screen is displayed.

4. Make the required changes.

For devices, you can edit the name of the device, device description, size of the device, and

estimated maximum power. For device groups, you can edit the group type, group name, group

description, and power capacity.