Users Guide

add_device_to_group

Usage:

ompc_cli add_device_to_group [-slot <slot_num>] [-service_tag <stag>]

[<device_name >] GROUP_PATH

The add_device_to_group command adds a device to a group. If a device is added to a rack, the

slot_num option is used to specify into which slot the device is added. If the value of the slot is -1, the

system chooses a slot automatically. When adding PDU/UPS, if you do not provide a slot option, the

PDU/UPS is attached to the rack. For adding a server or chassis to rack, -slot is allowed (when not

provided, the system chooses a slot automatically). If adding a server or chassis to other groups, -slot is

not allowed (an error is displayed).

Slots start from 1 (0 is an invalid slot number).

PDU and UPS can only be added to a rack. For PDU and UPS in other types of groups in a previous OMPC

release, if the you upgrade the data, you must remove PDU and UPS from those groups after upgrading.

The add_device_to_group command does not move a device from one group to another group. This is

done by move_device.

If a device already belongs to a group, you can use the add_device_to_group command to add the

device to another group. After successfully adding the device, this device belongs to both the old group

and the new parent group. The exception is that devices can only belong to one rack (not multiple racks),

and blades can only belong to one chassis (not multiple chassis). You cannot add blades to a chassis with

the add_device_to_group command.

When a chassis is added to any group, the blades inside the chassis is enumerated and the chassis

becomes a group that contains all of the blades inside it.

remove_device_from_group

Usage:

ompc_cli remove_device_from_group [-service_tag <stag>] [<device_name >]

GROUP_PATH

The remove_device_from_group command removes a device from a group identified by GROUP_PATH.

You can remove a chassis (as a device) from a group.

If a device belongs to multiple groups, after you remove it from one group, it still belongs to other

groups.

A chassis can be removed through this command. In this case, the behavior is the same as removing a

chassis by using the delete_group command.

move_device

Usage:

ompc_cli move_device [-service_tag <stag>] [<device_name >] [-slot <slot_num>]

FROM_GROUP_PATH TO_GROUP_PATH