Users Guide

– UPS Charge Failure
– UPS Fan Failure
– UPS Communication Lost
– PDU Low Load
– PDU High Load
– PDU Overload
– PDU Outlet Low Load
– PDU Outlet High Load
– PDU Outlet Overload
– PDU Outlet On
– PDU Outlet Off
– CMC SNMP Event
– iDRAC SNMP Event
– Protocol Operation Failed
– Entity Capabilities Changed
– Power Return To Normal
– Temperature Return To Normal
– Maximum Power
– Power
– Average Inlet Temperature
– Policy Cannot be Maintained
– Policy Return To Normal
– Blades Changed In Chassis
– Server Capabilities Changed
– Chassis Power Control Capabilities Changed
– Unsupported Sampling Interval
– Failed to Set Sampling Interval on Device
– MPCM Not Supported
– MPCM Configure Failed
– Device Hostname Changed
• Select a Severity level. The available options are:
– Critical
– Warning
– Information
• Enter the start and end dates in the Date From and Date To fields respectively. Use the format
MM/DD/YYYY. Only events from 00:00:00 of the start date to 00:00:00 of the day after the end
date are displayed. For example, if you enter the filtering option 01–01–2013 as both the start
date and end date, then all events from 00:00:00 of 01–01–2013 to 00:00:00 of 01–02–2013
are displayed.
• Select a user name from the drop-down list in the Acknowledged By field to sort by that user
name.
4. Click Run Once to view a filtered list of events.
108