Release Notes

Resolution or workaround: Check the LDAP configuration in OpenManage Power Center setting to make sure the IP address of
LDAP server is correct.
Issue 9: The memory power is incorrect for some devices in power history window.
Description: The power history chart in device page shows abnormal reading/spikes in memory power.
Resolution or workaround: Update the iDRAC firmware to latest to solve this issue.
Issue 10: Power capability changed from "Monitor and capping" to "None" for T420 Server when we apply the the iDRAC firmware
2.10.10.10.
Description: Eventhough T420 server have the capping capability, it will change to “None” if we apply iDRAC firmware
2.10.10.10,
Resolution or workaround: Update the iDRAC firmware to latest to solve this issue.
Installation Prerequisites
Dependencies
 Managed servers must have an Integrated Dell Remote Access Controller (iDRAC) 6, 7, or 8. It is recommended to use the latest
version firmware.
 Power Distribution Unit (PDU) and Uninterruptible Power Supply (UPS) devices must comply with the Management Information
Base (MIB) the vendor provides through SNMP interface.
 Devices must provide exclusive access for Power Center because the policies set on the devices from other management software
affect the Power Center power control function.
 The Baseboard Management Controller (BMC) user, through which Power Center communicates with devices, must be a local
user account whose roles include Administrator. The device must be configured to allow the Administrator to use at least one of
the cipher suite levels 0–3, and enable the IPMI over LAN setting.
 The WSman user, through which Power Center communicates with the chassis, must be a local user with the Administrator role.
The chassis must be configured to enable the Web Server service.
Installation Instructions
Download
1. Click the Download File link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where the file is downloaded and double-click the new file to unzip the downloaded package.
2. Specify the location to unzip the files.
3. Click on the unzip button to extract files.
Installation
Browse to the location where the files are unzipped and run the application.
Copyright © 2015 Dell Inc. All rights reserved. This product is protected by U.S. and international copyright and intellectual property laws.
Dell™ and the Dell logo are trademarks of Dell Inc. in the United States and/or other jurisdictions. All other marks and names mentioned herein may
be trademarks of their respective companies.