Owner's Manual

– Average Inlet Thermal Greater Than Critical Level—When the temperature is greater than the setting, the
warning-level event "Average Inlet Temperature" alert is sent.
– Average Inlet Thermal Less Than Warning Level—When the temperature is less than the setting, the
warning-level event "Average Inlet Temperature" alert is sent.
5. Click Finish to apply the new alert thresholds, or click Cancel to discard your changes..
After you have configured the thresholds, you will see four lines with different colors indicating the thresholds in the
Temperature Details tab.
For more information on how to configure the device/group range and sampling interval, see Monitoring Settings.
For more information on how to configure the default units and energy consumption, see Configuring Energy
Consumption Cost Settings.
Viewing Temperature Details
Click Devices in the left navigation pane, then select the Grouped Devices or Unassigned Devices tab. Click the icon for
the group or device, then refer to the lower detail portion of the screen.
Click View History under the Present Power heading to access the Temperature Details graph. By default, the
Temperature Details graph displays the temperature details for the previous hour.
You can also view the following details:
Temperature Details for the Current Time Window
You can view temperature details for the current time window by clicking a time window tab. The following table
describes the time windows and their associated intervals:
Table 6. Time Windows and Intervals
Time Window Description Interval
15Min 15 minutes 1 minute
1H 1 hour 3 minutes
1D 1 day 1 hour
1W 1 week 6 hours
1M 1 month 1 day
3M 3 months 1 week
1Y 1 year 2 weeks
NOTE: This table lists the interval when the sampling interval is at the default value (1 minute). Changing the sample
interval results in interval changes for the 15Min and 1H time windows. If you change the sampling interval to 3
minutes, the interval of the 15Min time window is 3 minutes. If you change the sampling interval to 6 minutes, the
interval of the 15Min time window is 3 minutes and the interval of the 1H time window is 6 minutes.
Temperature Details for a Different Time Window
Click the arrows < > to view the details for the previous/next sampling time, or click the double arrows << >> to view the
details for the previous/next page of results for the current time window. You can click Average, Maximum, or Minimum
to display the selected value.
74