Owner's Manual

NOTE: Check your data center power capacity to avoid tripping the breaker before performing the following steps.
• If you intend to uninstall Power Center, make sure to remove all devices first.
• If Power Center is corrupted, do one of the following to remove the power policies:
– If the device number is small, access the Dell iDRAC management console, and manually remove the
power policies.
– If the device number is large, perform the following steps. Power Center will remove the policies first,
and then remove the devices.
1. Install Power Center.
2. Add all the devices to the Power Center management console.
3. Create a logical group that contains all of the devices, and then create a power policy for this
group.
4. Remove all of these devices from the Power Center management console.
Why do I see the PostgreSQL error log "FATAL: terminating
connection due to administrator command" in the Windows event
log?
Possible Cause: This error is caused by Power Center server shutdown. Normally, the Power Center database service
(Dell OpenManage Power Center Database Server service) will stop after other Power Center services; however, if the
Power Center server has been shut down quickly, the Power Center database service will be forced to stop when other
Power Center services are not yet stopped. In this case, the database connection sessions that cannot be closed by
other Power Center services will be closed by the Power Center database service, and this error is generated. Since
such an error is caused by Windows when it shuts down the services quickly, Power Center will protect its important
data through transaction; therefore, this kind of error does not impact Power Center.
Resolution: No action is required.
113