Owner's Manual

– Base Distinguished Name to Search (required). The Distinguished Name of the branch of the directory from
which searches start. For example:
ou=ccr,dc=dell,dc=com
– Attribute of User Login (optional). Use this field to specify an attribute for which to search. If this field is not
configured, the default search string used is “uid”. The User Login attribute must be unique.
– Search Filter (optional). Specify a valid LDAP search filter if you cannot uniquely identify the login user
within the chosen Base Distinguished Name. If a search filter is not provided, the filter defaults to
(objectClass=*) and searches all objects in the tree. The maximum length of this property is 1024
characters.
– Certificate Validation Enabled (optional). If this option is selected, Power Center uses the CA certificate to
validate the LDAP server certificate during the SSL handshake.
– Upload Directory Service CA Certificate (optional unless Certificate Validation is enabled). Click Browse
and navigate to the CA certificate you want to upload, then click Open to upload the new certificate.
– Directory Service CA Certificate Information. Information describing the CA certificate currently in effect
displays.
– Network Timeout (seconds). Controls how long OpenManage Power Center LDAP will wait for an LDAP
server to set up a connection. The default is 30 seconds.
– Search Timeout (seconds).Controls how long an individual request can take before OpenManage Power
Center LDAP stops awaiting a response to the search request. The default is 120 seconds.
4. Click Apply to save these settings, or click Cancel to discard your changes.
99