Owner's Manual
Deleting an Event
1. Click Event Logs in the left pane.
2. Click Delete → Delete.
3. Select the events to delete, and click Apply.
Deleting all Events
1. Click Event Logs in the left pane.
2. Click Delete → Delete All.
A message window appears.
3. Click Yes.
All the events currently listed on the page are deleted.
Filtering Devices
You can apply a filter to show only specific devices.
1. Click Devices in the left pane.
2. Click Filter.
The Filter window opens.
3. Click a filtering option in the left pane (IP Range, Date Range, Protocol, Status, Device Type/Model, Physical Group,
Faceplate/De-rated Power, or Power Capability) to display a specific filtering option window.
4. In the filtering option window, use the displayed information to select one or more filtering options.
– IP Range — Enter the start and end IP address of devices.
– Date Range — Enter the start and end date of device discovery. Enter the dates manually in the format
<YYYY-MM-DD>, or select dates from the calendar. Devices discovered from 00:00:00 of start date to
00:00:00 of the next day after the end date are displayed. For example, if you enter the filtering option
2011-01-01 as both start date and end date, all devices discovered between 00:00:00 of 2011-01-01 and
00:00:00 of 2011-01-02 are displayed.
– Protocol — Select one or more protocols used for communication.
– Status — Select one or more device statuses.
– Device Type/Model — Select the device type or device model. Device Model is the specific model
information of a device type—for example, PowerEdge M610. All the models that currently exist in the
Device List page are shown. If you selected both Device Type and Device Model, make sure the device
type matches the device model. Otherwise, no result is shown.
– Physical Group — Select a physical group where the device is located. You can select any level of the
physical group, including data center, room, aisle, rack, chassis.
– Faceplate/De-rated Power — Enter a faceplate or de-rated power range of devices.
– Power Capability — Select one or more device power capabilities.
5. Click Apply.
The Device List page displays the filtered devices.
Filtering Events by Group/Device
You can filter the events by a group or device.
88