Owner's Manual

– Warning thresholds for average inlet temperature - Greater — When the temperature is greater than the

setting, the warning-level event "Average Inlet Temperature" is sent.

– Warning thresholds for average inlet temperature - Less — When the temperature is less than the setting,

the warning-level event "Average Inlet Temperature" is sent.

6. Click Apply.

After you have configured the thresholds, you will see four lines with different colors indicating the thresholds in the

Temperature Details tab.

For more information on how to configure the device/group range and sampling interval, see Monitoring Settings.

For more information on how to configure the default units and energy consumption, see Energy Consumption Settings.

Viewing Temperature Details

Click Groups in the left pane. Click the icon for the group or device, then open the Temperature tab.

By default, the Temperature Details graph displays the temperature details for the previous hour.

You can also view the following details:

Temperature Details for the Current Time Window

You can view temperature details for the current time window by clicking a time window tab. The following table

describes the time windows and their associated intervals:

Table 6. Time Windows and Intervals

Time Window Description Interval

15Min 15 minutes 1 minute

1H 1 hour 3 minutes

1D 1 day 1 hour

1W 1 week 6 hours

1M 1 month 1 day

3M 3 months 1 week

1Y 1 year 2 weeks

NOTE: This table lists the interval when the sampling interval is at the default value (1 minute). Changing the sample

interval results in interval changes for the 15Min and 1H time windows. If you change the sampling interval to 3

minutes, the interval of the 15Min time window is 3 minutes. If you change the sampling interval to 6 minutes, the

interval of the 15Min time window is 3 minutes and the interval of the 1H time window is 6 minutes.

Temperature Details for a Different Time Window

Click the arrows < > to view the details for the previous/next sampling time, or click the double arrows << >> to view the

details for the previous/next page of results for the current time window. You can click Average, Maximum, or Minimum

to display the selected value.

• Average: The average value from the previous time point to the current time point.

• Maximum: The maximum value from the previous time point to the current time point.