Owner's Manual

– WS-MAN Validate Certificate – (Optional) Enables device certificate validation.

NOTE: A trusted certificate must be imported into the system before the WS-MAN Validate Certificate

option is enabled, or communication may fail. For more information on how to install the certificate using

the Dell Chassis Management Controller, see the white paper

Using Windows Remote Management

(WinRM) to Remotely Manage Dell PowerEdge M1000e Using the Chassis Management Controller (CMC)

located at http://www.delltechcenter.com/page/dcim.modular.cmc.winrm. For more information on how to

import the certificate to Power Center, see Managing Certificates.

• SNMP v1v2c: Select an SNMP protocol version from SMMPv1 or SNMP v2/v2c for the PDU or UPS.

– SNMP Community string – (Required) Maximum length is 255 characters.

• SNMP v3: Select SNMP v3 for the PDU or UPS.

– SNMP User Name – (Required) Maximum length is 255 characters.

– SNMP Authentication Password – (Required) Maximum length is 16 characters.

– SNMP Encryption Password – Maximum length is 255 characters. When the SNMP Authentication

Password is empty, the SNMP Encryption Password is also empty.