Owner's Manual

list_device_props
Usage:
ompc_cli list_device_props [-service_tag <servtag>] [<device_name>]
The list_device_props command lists all properties for the device identified by servtag or device_name. Properties
include service_tag, protocol, protocol properties, device name, address (IP or host name), model, and device type
(device name is the first column).
Secret data (password/key) is not listed as a protocol property.
list_devices
Usage:
ompc_cli list_devices [GROUP_PATH]
The list_devices command lists all devices immediately under the GROUP_PATH. If no GROUP_PATH is supplied, then
the CLI will list all devices, connected or not, that are managed by OMPC. Properties include all properties of the
list_device_props command, except for protocol information (device name will be the first column).
If “/” is provided as GROUP_PATH, the CLI will list the devices at the root level.
list_group_props
Usage:
ompc_cli list_group_props GROUP_PATH
The list_group_props command lists all properties for a group identified by GROUP_PATH. Properties include
group_type (DC, room, rack, aisle, etc.), description, and additional properties unique to that group type. For example, for
rack, the additional properties include capacity and total power capacity.
This command does not apply to “/”.
list_groups
Usage:
ompc_cli list_groups [-unique] [GROUP_PATH]
The list_groups command lists all child groups for the GROUP_PATH (immediate only). If no GROUP_PATH is supplied,
the CLI lists all group paths or all unique groups in OMPC. Properties include the fully-qualified group name, group type,
and member_count. The member_count property is the number of devices and groups immediately under the child
group.
[-unique] has no impact if GROUP_PATH is provided.
If “/” is provided as GROUP_PATH, then the CLI lists the groups at root level.
A group might have multiple fully-qualified group names. When [-unique] is provided, the CLI lists all unique groups;
otherwise, the CLI will list all group paths.
Example output for list_groups:
group_name, group_type, member_count
myservers/mygroup, Room, 20
30